Jun-22-2019, 05:38 PM
hi, i am looking at creating the following script.
i currently have been working on a project over the last year for a wiegand access control system based on a raspberry pi. the system was tested and is now live and fitted in the commercial premises and working great. this was a base for something more tailored to our normal spec.
we mainly fit automatic gates and alot of the options that come for access on these gates are the following:
card access
ringing a phone number (gsm or landline) to open the gate
smart intercom systems
etc etc
with all the above we run into the problem of fitting numerous differnt controllers/systems all into 2 cabinet connected to each other and it gets a bit messy.
as above we have created out own access system using python and the raspberry pi to trigger a set of pins to give the gate a "open signal"
the next step of this project i am focusing on now is the following:
when a mobile/laptop/mac address - connects to the pi and its in a accepted list (a .txt file or something or even in the python script itself) it automatically triggers a GPIO pin on the pi. this would then send the "open signal" to the gate and open.
the idea was to have a password on the bluetooth or a hosted wifi network so when the device connects and gets accepted it triggers the output.
any help would be appreciated
thanks
i currently have been working on a project over the last year for a wiegand access control system based on a raspberry pi. the system was tested and is now live and fitted in the commercial premises and working great. this was a base for something more tailored to our normal spec.
we mainly fit automatic gates and alot of the options that come for access on these gates are the following:
card access
ringing a phone number (gsm or landline) to open the gate
smart intercom systems
etc etc
with all the above we run into the problem of fitting numerous differnt controllers/systems all into 2 cabinet connected to each other and it gets a bit messy.
as above we have created out own access system using python and the raspberry pi to trigger a set of pins to give the gate a "open signal"
the next step of this project i am focusing on now is the following:
when a mobile/laptop/mac address - connects to the pi and its in a accepted list (a .txt file or something or even in the python script itself) it automatically triggers a GPIO pin on the pi. this would then send the "open signal" to the gate and open.
the idea was to have a password on the bluetooth or a hosted wifi network so when the device connects and gets accepted it triggers the output.
any help would be appreciated
thanks