Python Forum

Hallo phyton programmers :).

i have some hard time getting this to working right.
i have this Stopwatch witch is working well, but i would like to have so when pin(38) on my raspbeery pi model 3B+ gets high(3.3V/input) then will the StopWatch Start.
and when pin(36) get High(3.3V/input) then it will stop the Stopwatch.

is there a nice person there can help me with this.

from tkinter import*
import tkinter.font
import RPi.GPIO as GPIO
import time
import os
import os


import RPi.GPIO as GPIO

GPIO.setmode(GPIO.BOARD)
GPIO.setup(38, GPIO.IN)




from tkinter import *
import time





def Main():
    global root

    root = Tk()
    root.title("Stopwatch")
    width = 600
    height = 200
    screen_width = root.winfo_screenwidth()
    screen_height = root.winfo_screenheight()
    x = (screen_width / 2) - (width / 2)
    y = (screen_height / 2) - (height / 2)
    root.geometry("%dx%d+%d+%d" % (width, height, x, y))
    Top = Frame(root, width=600)
    Top.pack(side=TOP)
    stopWatch = StopWatch(root)
    stopWatch.pack(side=TOP)
    Bottom = Frame(root, width=600)
    Bottom.pack(side=BOTTOM)
    Start = Button(Bottom, text='Start', command=stopWatch.Start, width=10, height=2)
    Start.pack(side=LEFT)
    Stop = Button(Bottom, text='Stop', command=stopWatch.Stop, width=10, height=2)
    Stop.pack(side=LEFT)
    Reset = Button(Bottom, text='Reset', command=stopWatch.Reset, width=10, height=2)
    Reset.pack(side=LEFT)
    Exit = Button(Bottom, text='Close', command=stopWatch.Exit, width=10, height=2)
    Exit.pack(side=LEFT)
    Title = Label(Top, text="Stopwatch For --------", font=("arial", 18), fg="white", bg="black")
    Title.pack(fill=X)
    root.config(bg="black")
    root.mainloop()


class StopWatch(Frame):

    def __init__(self, parent=None, **kw):
        Frame.__init__(self, parent, kw)
        self.startTime = 0.0
        self.nextTime = 0.0
        self.onRunning = 0
        self.timestr = StringVar()
        self.MakeWidget()

    def MakeWidget(self):
        timeText = Label(self, textvariable=self.timestr, font=("times new roman", 50), fg="green", bg="black")
        self.SetTime(self.nextTime)
        timeText.pack(fill=X, expand=NO, pady=2, padx=2)

    def Updater(self):
        self.nextTime = time.time() - self.startTime
        self.SetTime(self.nextTime)
        self.timer = self.after(50, self.Updater)

    def SetTime(self, nextElap):
        minutes = int(nextElap / 60)
        seconds = int(nextElap - minutes * 60.0)
        miliSeconds = int((nextElap - minutes * 60.0 - seconds) * 100)
        self.timestr.set('%02d:%02d:%02d' % (minutes, seconds, miliSeconds))

    def Start(self):
        if not self.onRunning:
            self.startTime = time.time() - self.nextTime
            self.Updater()
            self.onRunning = 1
       
            

                    
    def Stop(self):
        if self.onRunning:
            self.after_cancel(self.timer)
            self.nextTime = time.time() - self.startTime
            self.SetTime(self.nextTime)
            self.onRunning = 0

    def Exit(self):
            root.destroy()
            exit()

    def Reset(self):
        self.startTime = time.time()
        self.nextTime = 0.0
        self.SetTime(self.nextTime)


if __name__ == '__main__':
    Main()

You could add this two methods to your class StopWatch.

    def cb_start(self, channel):
        self.Start()
        
    def cb_stop(self, channel):
        self.Stop()

This two methods are called from outside by GPIO.add_event_detect.
The code which should setup the inputs and set the event detection.

def set_gpio(start_pin, stop_pin, start_cb, stop_cb):
    GPIO.setmode(GPIO.BOARD)
    GPIO.setup(start_pin, GPIO.IN)
    GPIO.setup(stop_pin, GPIO.IN)
    GPIO.add_event_detect(start_pin, GPIO.RISING, callback=start_cb, bouncetime=200)
    GPIO.add_event_detect(stop_pin, GPIO.RISING, callback=stop_cb, bouncetime=200)

Then add to Main after creation of a StopWatch instance, the set_gpio function call:

In Main():

stopWatch = StopWatch(root)
set_gpio(38, 36, stopWatch.cb_start, stopWatch.cb_stop)
stopWatch.pack(side=TOP)

More info about the GPIO functions are here: https://sourceforge.net/p/raspberry-gpio...ki/Inputs/

(May-22-2019, 12:42 PM)DeaD_EyE Wrote: [ -> ]You could add this two methods to your class StopWatch.
    def cb_start(self, channel):
        self.Start()
        
    def cb_stop(self, channel):
        self.Stop()
This two methods are called from outside by GPIO.add_event_detect.
The code which should setup the inputs and set the event detection.
def set_gpio(start_pin, stop_pin, start_cb, stop_cb):
    GPIO.setmode(GPIO.BOARD)
    GPIO.setup(start_pin, GPIO.IN)
    GPIO.setup(stop_pin, GPIO.IN)
    GPIO.add_event_detect(start_pin, GPIO.RISING, callback=start_cb, bouncetime=200)
    GPIO.add_event_detect(stop_pin, GPIO.RISING, callback=stop_cb, bouncetime=200)
Then add to Main after creation of a StopWatch instance, the set_gpio function call:

In Main():
stopWatch = StopWatch(root)
set_gpio(38, 36, stopWatch.cb_start, stopWatch.cb_stop)
stopWatch.pack(side=TOP)
More info about the GPIO functions are here: https://sourceforge.net/p/raspberry-gpio...ki/Inputs/

Thank you, for youre respons :)
i have tryed youre code, but it will stil not work for me :/

mike3001

DeaD_EyE

mike3001