TA-Lib pip install not working Mac (Fix Found) - Printable Version +- Python Forum (https://python-forum.io) +-- Forum: Python Coding (https://python-forum.io/forum-7.html) +--- Forum: General Coding Help (https://python-forum.io/forum-8.html) +--- Thread: TA-Lib pip install not working Mac (Fix Found) (/thread-31994.html) |
TA-Lib pip install not working Mac (Fix Found) - DrinkinBeer - Jan-14-2021 Whats up everyone, hoping someone has an ideas as I have tried everything I can find to make this work. Running iOS BigSur with Python 3.9.1 64bit. Ran brew install ta-lib - worked Ran on ENV pip install TA-Lib (BIG ASS RED ERROR) tried on system pip3 install TA-Lib (Big ASS RED ERROR) update: I tried installing with Python 3.7.9 and this also does not work Error starts with- ERROR: Command errored out with exit status 1: and runs 30 to 40 lines. Does any of you have a fix for this? Is it the Python version I am running or a 32vs64 bit issue? Mentioned this bellow, but here is the fix for anyone in the future: I found the solution!!!! Finally 1) brew install ta-lib 2) xcode-select --install 3) pip3 install TA-Lib 3-1) if you have multiple version of python on your system (i.e, 3.7 and 3.9) you must specify the version you want. For instance pip3.7 install TA-Lib or pip3.9. etc -- if you just use pip3 install, it will use the lower version of python installed, than other modules may need to be specified at that module. For example, I used pip3 install TA-Lib(which worked), but than when I installed flask(as I have 3.7 and 3.9) Flask kept failing until I specified pip3.9 install ta-Lib and pip3.9 install flask. worked also with pip3 install TA-Lib and pip3.7 install Flask. It is best to just identify both off the bat with the specific version of python you are using: pip3.7 or pip 3.9 install WhateverYouAreInstalling RE: TA-Lib pip install not working Mac - bowlofred - Jan-14-2021 Can you show the error? "exit status 1" doesn't mean anything by itself. RE: TA-Lib pip install not working Mac - DrinkinBeer - Jan-15-2021 (Jan-14-2021, 10:51 PM)bowlofred Wrote: Can you show the error? "exit status 1" doesn't mean anything by itself. ERROR: Command errored out with exit status 1: command: /Library/Frameworks/Python.framework/Versions/3.7/bin/python3.7 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/1r/zf6cc3ds5rxbp5_n67z4nks80000gn/T/pip-install-aysiu8ei/TA-Lib/setup.py'"'"'; __file__='"'"'/private/var/folders/1r/zf6cc3ds5rxbp5_n67z4nks80000gn/T/pip-install-aysiu8ei/TA-Lib/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/1r/zf6cc3ds5rxbp5_n67z4nks80000gn/T/pip-record-s9dxej5t/install-record.txt --single-version-externally-managed --compile --install-headers /Library/Frameworks/Python.framework/Versions/3.7/include/python3.7m/TA-Lib cwd: /private/var/folders/1r/zf6cc3ds5rxbp5_n67z4nks80000gn/T/pip-install-aysiu8ei/TA-Lib/ Complete output (22 lines): running install running build running build_py creating build creating build/lib.macosx-10.9-x86_64-3.7 creating build/lib.macosx-10.9-x86_64-3.7/talib copying talib/abstract.py -> build/lib.macosx-10.9-x86_64-3.7/talib copying talib/test_abstract.py -> build/lib.macosx-10.9-x86_64-3.7/talib copying talib/deprecated.py -> build/lib.macosx-10.9-x86_64-3.7/talib copying talib/__init__.py -> build/lib.macosx-10.9-x86_64-3.7/talib copying talib/stream.py -> build/lib.macosx-10.9-x86_64-3.7/talib copying talib/test_pandas.py -> build/lib.macosx-10.9-x86_64-3.7/talib copying talib/test_data.py -> build/lib.macosx-10.9-x86_64-3.7/talib copying talib/test_func.py -> build/lib.macosx-10.9-x86_64-3.7/talib copying talib/test_stream.py -> build/lib.macosx-10.9-x86_64-3.7/talib running build_ext building 'talib._ta_lib' extension creating build/temp.macosx-10.9-x86_64-3.7 creating build/temp.macosx-10.9-x86_64-3.7/talib gcc -Wno-unused-result -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch x86_64 -g -I/usr/include -I/usr/local/include -I/opt/include -I/opt/local/include -I/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/site-packages/numpy/core/include -I/Library/Frameworks/Python.framework/Versions/3.7/include/python3.7m -c talib/_ta_lib.c -o build/temp.macosx-10.9-x86_64-3.7/talib/_ta_lib.o xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun error: command 'gcc' failed with exit status 1 ---------------------------------------- ERROR: Command errored out with exit status 1: /Library/Frameworks/Python.framework/Versions/3.7/bin/python3.7 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/1r/zf6cc3ds5rxbp5_n67z4nks80000gn/T/pip-install-aysiu8ei/TA-Lib/setup.py'"'"'; __file__='"'"'/private/var/folders/1r/zf6cc3ds5rxbp5_n67z4nks80000gn/T/pip-install-aysiu8ei/TA-Lib/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/1r/zf6cc3ds5rxbp5_n67z4nks80000gn/T/pip-record-s9dxej5t/install-record.txt --single-version-externally-managed --compile --install-headers /Library/Frameworks/Python.framework/Versions/3.7/include/python3.7m/TA-Lib Check the logs for full command output. RE: TA-Lib pip install not working Mac - DrinkinBeer - Jan-15-2021 I found the solution!!!! Finally 1) brew install ta-lib 2) xcode-select --install 3) pip3 install TA-Lib |