Nov-27-2019, 07:59 AM
Hi, I am trying to place Image as background in frame which contains the textfield, button, and label.
Mentioned below is my code kindly help me out
Mentioned below is my code kindly help me out
import os import json import time import pyfirmata import multiprocessing import serial.tools.list_ports import tkinter as tk from tkinter.filedialog import asksaveasfile from tkinter import messagebox from PIL import ImageTk, Image data = ['LH', 'RH'] WAIT_BARCODE = r"images\wait_barcode.jpg" WRONG_BARCODE = r"images\wrong_barcode.jpg" Press = r"images\Press.jpg" Done = r"images\done.jpg" DATA_PATH = "data" JSON_PATH = r"json\data.json" JSON_FOLDER_PATH = "json" barcode_start = 4 barcode_stop = 10 high_pin = 13 input_pin = 10 NA = "NA" check = "NA" def dump_to_json(json_dict, filename): with open(filename, 'w') as file: json.dump(json_dict, file) def read_json(filename): with open(filename, 'r') as file: json_dict = json.load(file) return json_dict class SampleApp(tk.Tk): def __init__(self): tk.Tk.__init__(self) self._frame = None self.ard_stat = read_json(JSON_PATH) #if self.ard_stat['COM_PORT'] == ['OK']: self.switch_frame(StartPage) #else: #tk.messagebox.showinfo("Info", "Arduino is not connected, Please Try Again!") def switch_frame(self, frame_class): """Destroys current frame and replaces it with a new one.""" new_frame = frame_class(self) if self._frame is not None: self._frame.destroy() self._frame = new_frame self._frame.pack() class StartPage(tk.Frame): def loopCap(self): #self.master.geometry("1000x700+%d+%d" % (((self.master.winfo_screenwidth() / 2.) - (1280 / 2.)), ((self.master.winfo_screenheight() / 2.) - (720/ 2.)))) #self.master.state('zoomed') # print(data) with open(JSON_PATH) as json_file1: self.data = json.load(json_file1) #print(self.data) if self.data['status'] == 'ACTIVE': #and (self.data['RH_img']!= 'null' or self.data['LH_img']!= 'null') a = self.text.set(self.data['status']) b = self.text1.set(self.data['RH_cnt']) c = self.text2.set(self.data['LH_cnt']) d = self.text3.set(self.data['barcode']) #print(b) #print(c) #print(a) #print(d) if self.data['RH_img'] == 'NA': #print(self.data['RH_img']) self.img = Image.open(Press) self.img.load() else: #print(self.data['RH_img']) self.img = Image.open(self.data['RH_img']) self.img.load() #print("updated Image") if self.data['RH_cnt'] == 0: self.img = Image.open(Done) self.img.load() #else: # self.img = Image.open(self.data['RH_img']) # self.img.load() if self.data['LH_img'] == 'NA': #print(self.data['LH_img']) self.img1 = Image.open(Press) self.img1.load() else: #print(self.data['LH_img']) self.img1 = Image.open(self.data['LH_img']) self.img1.load() #print("updated Image") if self.data['LH_cnt'] == 0: self.img1 = Image.open(Done) self.img1.load() #else: # self.img1 = Image.open(self.data['LH_img']) # self.img1.load() elif self.data['status']=='NA': status = self.text.set(self.data['status']) #resp = tk.messagebox.showinfo("Info", "New Data Detected Please Add Images") #print(resp) count_RH = self.text1.set(self.data['RH_cnt']) count_LH = self.text2.set(self.data['LH_cnt']) self.text3.set(self.data['barcode']) #print(count_RH) #print(count_LH) self.img = Image.open(WAIT_BARCODE) self.img1 = Image.open(WAIT_BARCODE) #print("updated Image") elif self.data['status'] == 'INACTIVE': status = self.text.set(self.data['status']) # resp = tk.messagebox.showinfo("Info", "New Data Detected Please Add Images") # print(resp) count_RH = self.text1.set(self.data['RH_cnt']) count_LH = self.text2.set(self.data['LH_cnt']) self.text3.set(self.data['barcode']) # print(count_RH) # print(count_LH) self.img = Image.open(WRONG_BARCODE) self.img1 = Image.open(WRONG_BARCODE) #self.img = Image.open(text['RH_img']) self.photo = ImageTk.PhotoImage(self.img) self.label['image'] = self.photo #=========2nd Snap================== #self.img1 = Image.open("img.jpg") self.photo1 = ImageTk.PhotoImage(self.img1) self.label1['image'] = self.photo1 #print("updated") self.master.after(500, self.loopCap) return self.text, self.text1, self.text2, self.text3, self.data def next_save(self): #self.data1 = self.loopCap() #print("Save The Button") #print(self.data) new_string = self.data['barcode'][4:10] #tk.messagebox.showinfo("Info", "New Data Detected Please Add Images") #print(new_string) new_folder = os.path.join(DATA_PATH,new_string) if os.path.exists(new_folder): #print("Folder Already Exists If Condition") tk.messagebox.showinfo("Info", "Folder Already Exists") else: #os.isfile(new_string) #print("Folder Already Exists") #tkMessageBox.showinfo("Info", "Folder Already Exists") #print("Make Directory Else Condition") json_dict = read_json(JSON_PATH) json_dict.update({"frontend_status": "True"}) dump_to_json(json_dict, JSON_PATH) os.mkdir(new_folder) for i in range(0,len(data)): folder_name = os.path.join(DATA_PATH, new_string, data[i]) os.mkdir(folder_name) files = [('All Files', '*.*'), ('Python Files', '*.py'), ('Text Document', '*.txt')] file = asksaveasfile(initialdir=folder_name, filetypes=files, defaultextension=files) json_dict = read_json(JSON_PATH) json_dict.update({"frontend_status": "False"}) dump_to_json(json_dict, JSON_PATH) self.master.after(500, self.loopCap) def __init__(self, master): super().__init__(master) self.master.geometry("1000x700+%d+%d" % (((self.master.winfo_screenwidth() / 2.) - (1280 / 2.)), ((self.master.winfo_screenheight() / 2.) - (720 / 2.)))) #self.master.state('zoomed') self.master.config(bg='powder blue') #myvar = self.master Frame1 = tk.Frame(self.master) Frame1.pack(side="bottom", fill="x", pady=10, anchor='w') Frame2 = tk.Frame(self.master) Frame2.pack(side="left", fill="both", pady=10, anchor='w', expand=True ) photo = tk.PhotoImage(file="images/BG.jpg") label = tk.Label(Frame2, image=photo) label.image = photo label.place(x=0, y=0) tk.Label(Frame2, text=' Decal Check ', font=('arial', 25, 'bold'), bg='powder blue', fg='black', anchor='w').grid(column=0,pady=2) tk.Label(Frame2, text="Status:", bg='powder blue', font=('arial', 12, 'bold')).grid(row=3,column=0, padx=1, sticky='w') self.text = tk.StringVar() tk.Label(Frame2, textvariable=self.text, bg='powder blue',font=('arial', 12, 'bold')).grid(row=3,padx=1, column=1, sticky='w') tk.Label(Frame2, text="RH_COUNT: ", bg='powder blue', font=('arial', 12, 'bold')).grid(row=4,padx=1,column=0, sticky='w') self.text1 = tk.StringVar() tk.Label(Frame2, textvariable=self.text1, bg='powder blue',font=('arial', 12, 'bold')).grid(row=4, padx=1, column=1,sticky='w') tk.Label(Frame2, text=" LH_COUNT: ", bg='powder blue', font=('arial', 12, 'bold')).grid(row=5, padx=1, column=0,sticky='w') self.text2 = tk.StringVar() tk.Label(Frame2, textvariable=self.text2, bg='powder blue', font=('arial', 12, 'bold')).grid(row=5, padx=1, column=1, sticky='w') tk.Label(Frame2, text=" Barcode: ", bg='powder blue', font=('arial', 12, 'bold')).grid(row=6, padx=1, column=0, sticky='w') self.text3 = tk.StringVar() tk.Label(Frame2, textvariable=self.text3, bg='powder blue', font=('arial', 12, 'bold')).grid(row=6, padx=1, column=1, sticky='w') # tk.Label(Frame2, text=" Enter the Barcode: ", bg='powder blue', font=('arial', 12, 'bold')).grid(row=7, padx=1, column=0, sticky='w') #self.text4 = tk.StringVar() #tk.Entry(Frame2, font=('arial', 15, 'bold'), textvariable=self.text4).grid(row=7, padx=1, column=1, sticky='w') #b = tk.Button(Frame2, text="Submit", command=self.submit) #b.grid(row=7, column=2, pady=5,sticky='w') self.label = tk.Label(Frame2,bg='powder blue') self.label.grid(row=8, column=0, padx=5, pady=5, sticky='w') self.label1 = tk.Label(Frame2, bg='powder blue') self.label1.grid(row=8, column=1, padx=5, pady=5,sticky='w') tk.Label(Frame2, text=" RH Image ", bg='powder blue', font=('arial', 12, 'bold')).grid(row=10, padx=1, column=0, sticky='n') tk.Label(Frame2, text=" LH Image ", bg='powder blue', font=('arial', 12, 'bold')).grid(row=10, padx=1, column=1, sticky='n') b = tk.Button(Frame2, text="Add New Files", command= self.next_save) b.grid(row=11, column=1, pady=5, sticky='w') self.master.after(500, self.loopCap) def submit(self): check = (self.text4.get()) #print(check) return check def ui_main(): app = SampleApp() app.mainloop() def read_com_port(): com_port = "NA" while True: ports = list(serial.tools.list_ports.comports()) if ports: for p in ports: str2 = str(p) # print(len(str2), str2) if "Arduino" in str2: # print("done", str2) index1 = str2.find("COM") index2 = index1 + 5 com_port = str2[index1:index2] print("Switch found on COM port = ", com_port) temp_dict = read_json(JSON_PATH) temp_dict.update({'COM_PORT': 'OK'}) dump_to_json(temp_dict, JSON_PATH) if com_port == "NA": print("Could not detect Switch") else: print("No device is detected. Please check com ports") time.sleep(2) if com_port != "NA": break return com_port def arduino_init(): brd = pyfirmata.Arduino(read_com_port()) brd.digital[high_pin].write(1) it = pyfirmata.util.Iterator(brd) it.start() brd.digital[input_pin].mode = pyfirmata.INPUT return brd def find_folder(barcode): folder_name = "" flag = False if os.path.exists(DATA_PATH): with os.scandir(DATA_PATH) as entries: for entry in entries: dir_name = entry.name for name in dir_name.split(" "): if barcode[barcode_start:barcode_stop] == name: folder_name = os.path.join(DATA_PATH, dir_name) flag = True break return folder_name, flag def init_json_folder(): while True: if os.path.exists(JSON_FOLDER_PATH): print("JSON Folder Exists") if not os.path.exists(JSON_PATH): print("JSON file does not exist") json_dict = ({"status": NA, "barcode": NA, "RH_img": NA, "LH_img": NA, "RH_cnt": NA, "LH_cnt": NA, "frontend_status": "False", "COM_PORT": NA}) dump_to_json(json_dict, JSON_PATH) print("JSON file created") break #new_name = input("Enter a new folder name") #if new_path not in new_name: # new_path = os.path.join(DATA_PATH, new_name) # os.mkdir(new_path) else: print("JSON folder does not exist.") os.mkdir(JSON_FOLDER_PATH) def traverse_folder(folder_path, board): # print("folder") frh = folder_path + r"\RH" flh = folder_path + r"\LH" while True: cflag = False json_dict = read_json(JSON_PATH) with os.scandir(frh) as entries: cnt_rh = 0 for entry in entries: cnt_rh += 1 with os.scandir(flh) as entries: cnt_lh = 0 for entry in entries: cnt_lh += 1 temp_list = [cnt_lh, cnt_rh] loop_cnt = max(temp_list) for i in range(1, loop_cnt+1): """ while True: choice1 = board.digital[input_pin].read() time.sleep(.01) choice2 = board.digital[input_pin].read() time.sleep(.01) choice3 = board.digital[input_pin].read() time.sleep(.01) choice = choice1 & choice2 & choice3 if choice: break """ choice = input("Press Y to continue") #choice = StartPage.submit() if choice == 'Y' or choice == 'y': #if choice: if i <= cnt_lh: lh_file = os.path.join(flh, str(i)+".png") lh_cnt = i else: lh_file = NA lh_cnt = 0 if i <= cnt_rh: rh_file = os.path.join(frh, str(i)+".png") rh_cnt = i else: rh_file = NA rh_cnt = 0 json_dict.update({"status": "ACTIVE", "RH_img": rh_file, "LH_img": lh_file, "RH_cnt": rh_cnt, "LH_cnt": lh_cnt}) dump_to_json(json_dict, JSON_PATH) print(i, lh_file, rh_file) time.sleep(1) if i == loop_cnt: cflag = True #choice = input("Press Y to continue") #if choice == 'Y' or choice == 'y': """ while True: choice1 = board.digital[input_pin].read() time.sleep(.01) choice2 = board.digital[input_pin].read() time.sleep(.01) choice3 = board.digital[input_pin].read() time.sleep(.01) choice = choice1 & choice2 & choice3 if choice: break """ if cflag: json_dict.update({"status": NA, "barcode": NA, "RH_img": NA, "LH_img": NA, "RH_cnt": NA, "LH_cnt": NA}) dump_to_json(json_dict, JSON_PATH) break def main(): temp_dict = read_json(JSON_PATH) temp_dict.update({'COM_PORT': 'NA'}) dump_to_json(temp_dict, JSON_PATH) #arduino = arduino_init() arduino = "" while True: json_dict = read_json(JSON_PATH) # print(json_dict) time.sleep(1) # print(json_dict['frontend_status']) if json_dict['frontend_status'] == "False": s = input("Enter the barcode: ") print("You entered the value ", s) json_dict.update({"status": NA, "barcode": NA, "RH_img": NA, "LH_img": NA, "RH_cnt": NA, "LH_cnt": NA, "frontend_status": "False"}) dump_to_json(json_dict, JSON_PATH) if s == 'exit': break elif s != NA: folder_path, flag = find_folder(s) if flag: print("Active status") json_dict.update({'status': 'ACTIVE', "barcode": s}) dump_to_json(json_dict, JSON_PATH) traverse_folder(folder_path, arduino) else: print("Inactive status") json_dict.update({'status': 'INACTIVE', "barcode": s, "RH_img": NA, "LH_img": NA}) dump_to_json(json_dict, JSON_PATH) else: print("No barcode entered") if __name__ == '__main__': init_json_folder() p1 = multiprocessing.Process(target=ui_main) p1.start() main() # s="QWEWWHBDGEWQSDQA", 'WQSDWHBDUFFEWSA'