inkscape plugin write in python error

[costycnc]

Now working!
Now pass over exception and create gcode file!
here is exceptin debug:

Type: <type 'list'>
Len: 2
Content: ['Z', []]
Type: <type 'list'>
Len: 2
Content: ['Z', []]
{http://www.w3.org/2000/svg}path --- m 140.56641,264.72759 h -3.65235 v -2.32422 q -0.48828,0.33203 -1.32812,0.9375 -0.82031,0.58594 -1.60156,0.9375 -0.91797,0.44922 -2.10938,0.74219 -1.19141,0.3125 -2.79297,0.3125 -2.94922,0 -5,-1.95313 -2.05078,-1.95312 -2.05078,-4.98047 0,-2.48047 1.05469,-4.0039 1.07422,-1.54297 3.04687,-2.42188 1.99219,-0.8789 4.78516,-1.1914 2.79297,-0.3125 5.99609,-0.46875 v -0.56641 q 0,-1.25 -0.44922,-2.07031 -0.42968,-0.82032 -1.25,-1.28907 -0.78125,-0.44921 -1.875,-0.60546 -1.09375,-0.15625 -2.28515,-0.15625 -1.44531,0 -3.22266,0.39062 -1.77734,0.37109 -3.67187,1.09375 h -0.19532 v -3.73047 q 1.07422,-0.29297 3.10547,-0.64453 2.03125,-0.35156 4.00391,-0.35156 2.30469,0 4.00391,0.39062 1.71875,0.3711 2.96875,1.28907 1.23046,0.89843 1.875,2.32421 0.64453,1.42579 0.64453,3.53516 z m -3.65235,-5.3711 v -6.07421 q -1.67968,0.0977 -3.96484,0.29296 -2.26563,0.19532 -3.59375,0.56641 -1.58203,0.44922 -2.5586,1.40625 -0.97656,0.9375 -0.97656,2.59766 0,1.875 1.13281,2.83203 1.13282,0.9375 3.45704,0.9375 1.93359,0 3.53515,-0.74219 1.60157,-0.76172 2.96875,-1.81641 z --- 0.0

[(140.56641, 264.72759), (136.91405999999998, 264.72759), (136.91405999999998, 262.40337), (136.42577999999997, 262.73539999999997), (134.76562999999996, 263.92681), (133.06640999999996, 264.72759), (130.68358999999998, 265.33306), (126.13280999999998, 265.33306), (122.03124999999997, 261.42681), (122.03124999999997, 255.91898999999998), (124.16015999999996, 252.85259), (128.12499999999997, 251.09478000000001), (133.71093999999997, 250.46978000000001), (136.91405999999998, 249.74712000000002), (136.91405999999998, 248.49712000000002), (136.03516, 246.85649), (134.43358999999998, 245.93853000000001), (132.24608999999998, 245.62603000000001), (129.60938, 245.62603000000001), (126.05469, 246.38774000000004), (123.96484, 247.11040000000003), (123.96484, 243.37993000000003), (125.03905999999999, 243.08696000000003), (129.10156, 242.38384000000002), (133.37891, 242.38384000000002), (136.79688, 243.14556000000005), (139.27733999999998, 244.96196000000003), (140.56641, 247.81353000000004), (136.91405999999998, 259.35649), (136.91405999999998, 253.28228000000001), (135.23438, 253.37998000000002), (130.68358999999998, 253.77056000000002), (127.77343999999997, 254.59087), (125.82030999999996, 256.4854), (125.82030999999996, 260.02056), (128.08593999999997, 261.91508999999996), (132.34374999999997, 261.91508999999996), (135.54687999999996, 260.41117999999994)]

and here is result:

G01 F300
G01 X140.566 Y264.728 Z0.0 E0.0
G01 X136.914 Y264.728 Z0.0 E0.0
G01 X136.914 Y262.403 Z0.0 E0.0
G01 X136.426 Y262.735 Z0.0 E0.0
G01 X134.766 Y263.927 Z0.0 E0.0
G01 X133.066 Y264.728 Z0.0 E0.0
G01 X130.684 Y265.333 Z0.0 E0.0
G01 X126.133 Y265.333 Z0.0 E0.0
G01 X122.031 Y261.427 Z0.0 E0.0
G01 X122.031 Y255.919 Z0.0 E0.0
G01 X124.160 Y252.853 Z0.0 E0.0
G01 X128.125 Y251.095 Z0.0 E0.0
G01 X133.711 Y250.470 Z0.0 E0.0
G01 X136.914 Y249.747 Z0.0 E0.0
G01 X136.914 Y248.497 Z0.0 E0.0
G01 X136.035 Y246.856 Z0.0 E0.0
G01 X134.434 Y245.939 Z0.0 E0.0
G01 X132.246 Y245.626 Z0.0 E0.0
G01 X129.609 Y245.626 Z0.0 E0.0
G01 X126.055 Y246.388 Z0.0 E0.0
G01 X123.965 Y247.110 Z0.0 E0.0
G01 X123.965 Y243.380 Z0.0 E0.0
G01 X125.039 Y243.087 Z0.0 E0.0
G01 X129.102 Y242.384 Z0.0 E0.0
G01 X133.379 Y242.384 Z0.0 E0.0
G01 X136.797 Y243.146 Z0.0 E0.0
G01 X139.277 Y244.962 Z0.0 E0.0
G01 X140.566 Y247.814 Z0.0 E0.0
G01 X136.914 Y259.356 Z0.0 E0.0
G01 X136.914 Y253.282 Z0.0 E0.0
G01 X135.234 Y253.380 Z0.0 E0.0
G01 X130.684 Y253.771 Z0.0 E0.0
G01 X127.773 Y254.591 Z0.0 E0.0
G01 X125.820 Y256.485 Z0.0 E0.0
G01 X125.820 Y260.021 Z0.0 E0.0
G01 X128.086 Y261.915 Z0.0 E0.0
G01 X132.344 Y261.915 Z0.0 E0.0
G01 X135.547 Y260.411 Z0.0 E0.0

---

The response of debug is high because haved two lines under program.
i close these 2 extra lines with debug and now response at error is only

Type: <type 'list'>
Len: 2
Content: ['Z', []]

but important is that program not blocking more at this line
is execute all and create the gcode
Anyway ... is not perfect mode ... but for mine is perfect
i lost 3 days for find a way to make program working ... and i not find any response!
Thanks again!