Hello,
I need to develop a project with the codes I share with you.The details of the project are as follows.Could you help me about this issue?
button pressed for 9 seconds, move = 0
button pressed for more than 10 seconds, move = 1
and count should be every 10 seconds as a separate move.
As a result, Could you help me to keep the log as time and movement?(example :21/02/2019 - 22:17 - 10 second - move: 1)
The application should be waiting for the button to be pressed when it is opened.
the values on the first start-up will be as follows:
n = 0 number of moves
t = 0 time counter
n = n + 1 if each button is pressed t = 10 seconds
hold button t = 3 seconds n = 0
Press and hold the button t = 11 seconds n = 1
hold button t = 15 seconds n = 2
n = 2 value will not change when t = 2 seconds pressed
hold button t = 20 seconds n = 3
hold button t = 15 seconds n = 4
hold button t = 14 seconds n = 5
n = 5 value will not change when t = 5 seconds pressed
When the program is run and the button is pressed, it must record every movement as log in the example below.
n = 1 18.02.2018 - 08:01:12, n = 2 18.02.2018 - 08:01:27
I need to develop a project with the codes I share with you.The details of the project are as follows.Could you help me about this issue?
button pressed for 9 seconds, move = 0
button pressed for more than 10 seconds, move = 1
and count should be every 10 seconds as a separate move.
As a result, Could you help me to keep the log as time and movement?(example :21/02/2019 - 22:17 - 10 second - move: 1)
The application should be waiting for the button to be pressed when it is opened.
the values on the first start-up will be as follows:
n = 0 number of moves
t = 0 time counter
n = n + 1 if each button is pressed t = 10 seconds
hold button t = 3 seconds n = 0
Press and hold the button t = 11 seconds n = 1
hold button t = 15 seconds n = 2
n = 2 value will not change when t = 2 seconds pressed
hold button t = 20 seconds n = 3
hold button t = 15 seconds n = 4
hold button t = 14 seconds n = 5
n = 5 value will not change when t = 5 seconds pressed
When the program is run and the button is pressed, it must record every movement as log in the example below.
n = 1 18.02.2018 - 08:01:12, n = 2 18.02.2018 - 08:01:27
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 |
import RPi.GPIO as GPIO import time GPIO.setmode(GPIO.BCM) GPIO.setwarnings( False ) GPIO.setup( 7 , GPIO.IN, GPIO.PUD_UP) while True : # waiting for switch on print " waiting for first button press" while GPIO. input ( 7 ) = = 1 : time.sleep( 0.2 ) else : on = time.time() start = (time.strftime( "%a %b %d %Y %H:%M:%S" )) print "switch on at " , start time.sleep( 2 ) # waiting for switch off print " waiting for second button press" while GPIO. input ( 7 ) = = 1 : time.sleep( 0.2 ) else : off = time.time() stop = (time.strftime( "%a %b %d %Y %H:%M:%S" )) difference = off - on print "switch off at " , stop print "time since switch on" seconds = difference minutes = seconds / / 60 hours = minutes / / 60 delay = "%02d:%02d:%02d" % (hours, minutes % 60 , seconds % 60 ) print delay print " " result = open ( "/home/pi/times.txt" , "a" ) result.write( "switch on " + start + "\n" ) result.write( "switch off " + stop + "\n" ) result.write( "time between button presses " + delay + "\n" ) result.write( " \n" ) result.close() time.sleep( 2 ) |