Current time on x axis in matplolib

[Stumpy_L]

I'm monitoring and plotting temperature and pressure and would like to do so over the last 24 hours. I am getting the data from an Arduino sending the temp and pressure via the serial port in the following format "17.4 , 30.2". I can read and plot the data no problem but I can't figure out how to have the x axis show the current time on the right and the last 24 hours to the left. I have looked in the forums and some help files and have figured out how to get the hour and minutes but when I try to use either of those as my Xlim max it doesn't show the data. I think the problem is my data is not time stamped but goes by a sample count. I've tried a few things but am getting no where. I assume I'm not the first to do this, no sense reinventing the wheel.

What I would like is to have the current time on the far right of the graph, divided in 4 hour major ticks labeled with that time, minor ticks just showing no time attached. If the elapsed time goes past 12:00 midnight then the hours will show 8:00 of the previous day.

here's my code

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

# Graphing Temperature and Pressure   import serial # Import Serial Library import numpy # Import numpy import matplotlib.pyplot as plt #import matplot lib from drawnow import * import time from datetime import datetime from matplotlib.dates import DateFormatter, AutoDateFormatter, AutoDateLocator   tempArray = [] PressureArray = []   ArduinoData = serial.Serial('com8', 115200) # Read from Com8, that Mega is connect to at 115200 baud plt.ion() # tell matplotlib you want iteractive mode to plot live data count =0 # counts number of times loop runs   # Read Current Time Current_time = time.localtime() #Gets current date and time hour = Current_time[3] #Current hour minute =Current_time[4] #Current minute       def makePlot(): #create a function that makes our desired plot        plt.ylim(0, 50) # sets min/max on y axis on graph     plt.title('Live Temp and Pressure') # add title to graph     plt.grid(True) # turn grid on     plt.ylabel('Temp F') # Y axis label     plt.plot(tempArray, 'ro-', label='Degrees F') # plots temp array as red with dots and connecting line     plt.legend(loc='upper left') # puts Y axis line legend at top left of graph     plt2=plt.twinx() # creates a second plot from first for pressure     plt.ylim(27, 32) # set limit of 2nd Y axis     plt2.plot(PressureArray, 'b^-', label = 'Pressure in "Hg') # plot Pressure with blue triangles and connecting line     plt2.set_ylabel('Pressure "Hg') # adds label to second Y axis, have to use the set_label because of seconf plot     plt2.ticklabel_format(useOffset=False) # use for when pressure is in Pascals keeps large number on 2nd Y axis scale     plt2.legend(loc='upper right') # puts 2nd Y axis line legend at top right of graph                                 while True: # forever while loop     while (ArduinoData.inWaiting() == 0): # Wait for data in serial port            pass # do nothing     ArduinoString = ArduinoData.readline() # read data as a full string     dataArray = ArduinoString.split(' , ') # split full string into parts separated by a ,     temp = float (dataArray[0]) # convert first element in array to a float     Pressure = float (dataArray[1]) # convert second element in array to a float           tempArray.append(temp) # load temperature Array     PressureArray.append(Pressure) # load Pressure Array     drawnow (makePlot) # Call drawnow to update the live graph     plt.pause(0.00001) # short pause needed for drawnow     count = count + 1 # increments loop counter     if(count > 50): # test if loop counts are above 50, defines length of X axis         tempArray.pop(0) # removes first element of temp array         PressureArray.pop(0) # removes first element of Pressure array

Thanks
John

[Larz60+]

Since you haven't saved time, you'll have to use the sample number as a linear tick on the x axis.
Or, if you know what time the measurements started and the interval between samples, then you can calculate the time.
for setting up and labeling x, y see: https://plot.ly/matplotlib/figure-labels/

[Stumpy_L]

I'm sorry but I can't follow what you've asked me to do. This is all new to me. I went on the link you provided and tried adding some of the custom legend lines but I can't figure it out.

Could you give me an example to work with?

Could I save the time as I'm reading the data in, (make a double array or a separate array?) and then use that as my x axis? The Arduino doesn't know what time it is so I would have to grab the time from my PC as I read the data.

Thanks for your help
John